Sportwin 4423 Carburetor

After removing the Carburetor from the motor, here is what it looked like

dsc00005.jpg (36975 bytes)dsc00008.jpg (49263 bytes)dsc00014.jpg (49263 bytes)dsc00016.jpg (51311 bytes)dsc00017.jpg (51311 bytes)dsc00006.jpg (52847 bytes)

dsc00004.jpg (53871 bytes)dsc00009.jpg (53871 bytes)dsc00007.jpg (55919 bytes)dsc00013.jpg (55919 bytes)dsc00012.jpg (56431 bytes)dsc00015.jpg (56943 bytes)

dsc00010.jpg (57967 bytes)

-There was some stuff in the sediment bowl. The bowl itself, and the seal are in good shape

-The screen had residue on about 1/8th of it (white stuff, looked like cob webs)

-There was some white flaky stuff in the float bowl

-Cork float is intact but probably needs re-sealing

 

While I had the Carburetor apart I cleaned it up.

3.jpg (37487 bytes)4.jpg (41071 bytes)1.jpg (45679 bytes)2.jpg (48751 bytes)5.jpg (49775 bytes)7.jpg (53359 bytes)

8.jpg (55919 bytes)6.jpg (57455 bytes)

-I was not able to clean the drain in the bottom of the float bowl

-The cork float will still require re-sealing